[pfSense] pf vrs mono?

Matthias May matthias.may at gmx.ch
Tue May 1 11:51:53 EDT 2012


Am 01.05.2012 17:34, schrieb Andrew @ ATMlogic.ca:
> There just is not enough detail to say why it's happening. Even seeing
> the output of the banner on the console menu would be more than we're
> seeing here. Going on pure speculation only gets us so far.
>
> As below.  Connecting a PC to sis0 (through a switch) will get an IP
> (10.0.0.100) however and through the web page I can ping external address's
> yet I cannot complete a connection to any external website.  I will do a
> reset to factory defaults, get a laptop connected to the LAN and do some
> more testing.
>
> After the #4 reset what do you suggest as my next 3-5 steps?
>
> *** Welcome to pfSense 2.0.1-RELEASE-nanobsd (i386) on lulu ***
>
>    WAN (wan)                 ->  sis1       ->  192.168.0.73 (DHCP)
>    LAN (lan)                 ->  sis0       ->  10.0.0.1
>    OPT1 (opt1)               ->  sis2       ->  192.168.0.15
>
>   0) Logout (SSH only)                  8) Shell
>   1) Assign Interfaces                  9) pfTop
>   2) Set interface(s) IP address       10) Filter Logs
>   3) Reset webConfigurator password    11) Restart webConfigurator
>   4) Reset to factory defaults         12) pfSense Developer Shell
>   5) Reboot system                     13) Upgrade from console
>   6) Halt system                       14) Disable Secure Shell (sshd)
>   7) Ping host
>
> Enter an option:
>
> _______________________________________________
> List mailing list
> List at lists.pfsense.org
> http://lists.pfsense.org/mailman/listinfo/list
>

You have the same subnet on WAN and OPT1.
Remove the OPT1 (or move to a different subnet) and it will probably 
start working.

Greetings
Matthias May


More information about the List mailing list