[pfSense] pf vrs mono?
millenia2000 at hotmail.com
Tue May 1 12:24:39 EDT 2012
> -----Original Message-----
> From: list-bounces at lists.pfsense.org
[mailto:list-bounces at lists.pfsense.org]
> On Behalf Of Andrew @ ATMlogic.ca
> Sent: Tuesday, May 01, 2012 12:02 PM
> To: 'pfSense support and discussion'
> Subject: Re: [pfSense] pf vrs mono?
> >You have the same subnet on WAN and OPT1.
> >Remove the OPT1 (or move to a different subnet) and it will probably
> >start working.
> Did a factory reset assigned WAN and LAN and no OPT have not touched ANY
> other config. (Also have not tested with laptop on LAN yet, but will just
> suggest that its not going to work) WAN is getting DHCP IP address from
> Server 2003 that his controlling DNS (IP address 192.168.0.5) my
> Gateway/Firewall is SME 7.4 on IP address 192.168.0.254. In "some" cases
> have seen devices look to the gateway for DNS and have had to manually set
> the DNS as 192.168.0.5
> What is my next step?
I would still disable the option previously stated that blocks private
VLANs, otherwise, that should be all you need to get it to work.
More information about the List