[pfSense] pf vrs mono?
millenia2000 at hotmail.com
Tue May 1 12:35:27 EDT 2012
> -----Original Message-----
> From: list-bounces at lists.pfsense.org
[mailto:list-bounces at lists.pfsense.org]
> On Behalf Of Sean Cavanaugh
> Sent: Tuesday, May 01, 2012 12:25 PM
> To: 'pfSense support and discussion'
> Subject: Re: [pfSense] pf vrs mono?
> > -----Original Message-----
> > From: list-bounces at lists.pfsense.org
> [mailto:list-bounces at lists.pfsense.org]
> > On Behalf Of Andrew @ ATMlogic.ca
> > Sent: Tuesday, May 01, 2012 12:02 PM
> > To: 'pfSense support and discussion'
> > Subject: Re: [pfSense] pf vrs mono?
> > >You have the same subnet on WAN and OPT1.
> > >Remove the OPT1 (or move to a different subnet) and it will probably
> > >start working.
> > >mailman/listinfo/list
> > Did a factory reset assigned WAN and LAN and no OPT have not touched
> > ANY other config. (Also have not tested with laptop on LAN yet, but
> > will just suggest that its not going to work) WAN is getting DHCP IP
> > address from
> > Server 2003 that his controlling DNS (IP address 192.168.0.5) my
> > Gateway/Firewall is SME 7.4 on IP address 192.168.0.254. In "some"
> > cases
> > have seen devices look to the gateway for DNS and have had to manually
> > set the DNS as 192.168.0.5
> > What is my next step?
> I would still disable the option previously stated that blocks private
> otherwise, that should be all you need to get it to work.
Private networks...not VLANS. Been doing too much VLAN programming today.
More information about the List