[pfSense] Vlan Trunk

[Espen Johansen]

With one exception, it seems you want to use the same vlan as both lan and
wan (Vlan 10)???

On Wed, May 2, 2012 at 8:34 PM, Espen Johansen <pfsense at gmail.com> wrote:

> What exactly is your question here?
> I don't see any issue implementing this.
>
> -lsf
>
> On Wed, May 2, 2012 at 7:08 PM, steel max <steelmax11136 at gmail.com> wrote:
>
>>  Dear All,
>>
>>  I am trying to implement a wireless network on my corporate environment
>> using, Authentication by Domain Controller windows AD & Radius on same
>> Server as well with Pfsense Captive Portal!
>> ***Thanks to you guys for the help, I have done that in my testing zone!
>>
>>  *ABOUT My Corporate Network:
>> *Our Corporate network is pretty much complicate to me. Its back-end is
>> powered by a Linux DHCP, Squid Proxy, Cisco Firewall & Layer 3 Switch (Core
>> Switch) which has 19 Vlans and all Vlans are trucked and distributed over
>> the network using manageable Dlink switches. Vlans are 5 to 95 and the Vlan
>> I'm intended to use is Vlan10 which is configured in the Layer 3 Switch as
>> a 'Guest Vlan'.
>> Vlan5 is for Data Center, which gives IP range: 192.168.1.xxx & Vlan10
>> (GuestVlan) IP is 192.168.2.xxx! And goes so on according to VlanID!
>> Our Network is more like a Campus Area Network. We have 5 separate
>> building in the city connected by Fiber Optic Cable Provided by 3rd Party.
>> So Vlan10 will be distributed across the network as like other Vlans
>> through trunk ports!
>>
>>
>> *About implementation:*
>>
>>  *I want the Output from pfsense should give:*
>>
>> * *
>> 1.    Pfsense should’ve WAN of Vlan5 as all the servers in Datacenter
>> are in that range of IP
>> 2.    WAN from Core Switch Vlan10 (WAN from vlan5 & 10 may be dual WAN
>> or something?)
>> 3.    LAN only Vlan10
>> 4.    LAN output Vlan tagging and trucking enabled to distribute across
>> the network
>> 5.    Pfsense should be able to talk Windows AD & Radius Server
>> 6.    Any user connected to Vlan10 should pass through captive portal &
>> radius Server
>>
>>
>>
>> *So above noted 6 points are what I intended to achieve! So Please guys
>> help me on this **:)**. Hope I have given Info!
>> *
>>
>> _______________________________________________
>> List mailing list
>> List at lists.pfsense.org
>> http://lists.pfsense.org/mailman/listinfo/list
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pfsense.org/pipermail/list/attachments/20120502/e18f03f4/attachment-0001.html>