[pfSense] Vlan Trunk

Abdullah Nihan abd.nhn at gmail.com
Wed May 2 23:44:10 EDT 2012


Espen thanks for your reply, that's correct I want I want to use Vlan10 to
be WAN as well as LAN.

Since I wrote about the scenario can you give me suggestions on how to do
this?

On 2 May 2012 23:37, Espen Johansen <pfsense at gmail.com> wrote:

> With one exception, it seems you want to use the same vlan as both lan and
> wan (Vlan 10)???
>
>
> On Wed, May 2, 2012 at 8:34 PM, Espen Johansen <pfsense at gmail.com> wrote:
>
>> What exactly is your question here?
>> I don't see any issue implementing this.
>>
>> -lsf
>>
>> On Wed, May 2, 2012 at 7:08 PM, steel max <steelmax11136 at gmail.com>wrote:
>>
>>>  Dear All,
>>>
>>>  I am trying to implement a wireless network on my corporate
>>> environment using, Authentication by Domain Controller windows AD & Radius
>>> on same Server as well with Pfsense Captive Portal!
>>> ***Thanks to you guys for the help, I have done that in my testing zone!
>>>
>>>  *ABOUT My Corporate Network:
>>> *Our Corporate network is pretty much complicate to me. Its back-end is
>>> powered by a Linux DHCP, Squid Proxy, Cisco Firewall & Layer 3 Switch (Core
>>> Switch) which has 19 Vlans and all Vlans are trucked and distributed over
>>> the network using manageable Dlink switches. Vlans are 5 to 95 and the Vlan
>>> I'm intended to use is Vlan10 which is configured in the Layer 3 Switch as
>>> a 'Guest Vlan'.
>>> Vlan5 is for Data Center, which gives IP range: 192.168.1.xxx & Vlan10
>>> (GuestVlan) IP is 192.168.2.xxx! And goes so on according to VlanID!
>>> Our Network is more like a Campus Area Network. We have 5 separate
>>> building in the city connected by Fiber Optic Cable Provided by 3rd Party.
>>> So Vlan10 will be distributed across the network as like other Vlans
>>> through trunk ports!
>>>
>>>
>>> *About implementation:*
>>>
>>>  *I want the Output from pfsense should give:*
>>>
>>> * *
>>> 1.    Pfsense should’ve WAN of Vlan5 as all the servers in Datacenter
>>> are in that range of IP
>>> 2.    WAN from Core Switch Vlan10 (WAN from vlan5 & 10 may be dual WAN
>>> or something?)
>>> 3.    LAN only Vlan10
>>> 4.    LAN output Vlan tagging and trucking enabled to distribute across
>>> the network
>>> 5.    Pfsense should be able to talk Windows AD & Radius Server
>>> 6.    Any user connected to Vlan10 should pass through captive portal &
>>> radius Server
>>>
>>>
>>>
>>> *So above noted 6 points are what I intended to achieve! So Please guys
>>> help me on this **:)**. Hope I have given Info!
>>> *
>>>
>>> _______________________________________________
>>> List mailing list
>>> List at lists.pfsense.org
>>> http://lists.pfsense.org/mailman/listinfo/list
>>>
>>>
>>
>
> _______________________________________________
> List mailing list
> List at lists.pfsense.org
> http://lists.pfsense.org/mailman/listinfo/list
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pfsense.org/pipermail/list/attachments/20120503/66e07ac7/attachment.html>


More information about the List mailing list