[pfSense] Vlan Trunk

Abdullah Nihan abd.nhn at gmail.com
Thu May 3 03:23:58 EDT 2012


I have posted this on forum please write you suggestion on there...!  Link
bellow:
http://forum.pfsense.org/index.php/topic,49043.msg259653.html#msg259653


On 3 May 2012 08:44, Abdullah Nihan <abd.nhn at gmail.com> wrote:

> Espen thanks for your reply, that's correct I want I want to use Vlan10 to
> be WAN as well as LAN.
>
> Since I wrote about the scenario can you give me suggestions on how to do
> this?
>
>
> On 2 May 2012 23:37, Espen Johansen <pfsense at gmail.com> wrote:
>
>> With one exception, it seems you want to use the same vlan as both lan
>> and wan (Vlan 10)???
>>
>>
>> On Wed, May 2, 2012 at 8:34 PM, Espen Johansen <pfsense at gmail.com> wrote:
>>
>>> What exactly is your question here?
>>> I don't see any issue implementing this.
>>>
>>> -lsf
>>>
>>> On Wed, May 2, 2012 at 7:08 PM, steel max <steelmax11136 at gmail.com>wrote:
>>>
>>>>  Dear All,
>>>>
>>>>  I am trying to implement a wireless network on my corporate
>>>> environment using, Authentication by Domain Controller windows AD & Radius
>>>> on same Server as well with Pfsense Captive Portal!
>>>> ***Thanks to you guys for the help, I have done that in my testing zone!
>>>>
>>>>  *ABOUT My Corporate Network:
>>>> *Our Corporate network is pretty much complicate to me. Its back-end
>>>> is powered by a Linux DHCP, Squid Proxy, Cisco Firewall & Layer 3 Switch
>>>> (Core Switch) which has 19 Vlans and all Vlans are trucked and distributed
>>>> over the network using manageable Dlink switches. Vlans are 5 to 95 and the
>>>> Vlan I'm intended to use is Vlan10 which is configured in the Layer 3
>>>> Switch as a 'Guest Vlan'.
>>>> Vlan5 is for Data Center, which gives IP range: 192.168.1.xxx & Vlan10
>>>> (GuestVlan) IP is 192.168.2.xxx! And goes so on according to VlanID!
>>>> Our Network is more like a Campus Area Network. We have 5 separate
>>>> building in the city connected by Fiber Optic Cable Provided by 3rd Party.
>>>> So Vlan10 will be distributed across the network as like other Vlans
>>>> through trunk ports!
>>>>
>>>>
>>>> *About implementation:*
>>>>
>>>>  *I want the Output from pfsense should give:*
>>>>
>>>> * *
>>>> 1.    Pfsense should’ve WAN of Vlan5 as all the servers in Datacenter
>>>> are in that range of IP
>>>> 2.    WAN from Core Switch Vlan10 (WAN from vlan5 & 10 may be dual WAN
>>>> or something?)
>>>> 3.    LAN only Vlan10
>>>> 4.    LAN output Vlan tagging and trucking enabled to distribute
>>>> across the network
>>>> 5.    Pfsense should be able to talk Windows AD & Radius Server
>>>> 6.    Any user connected to Vlan10 should pass through captive portal
>>>> & radius Server
>>>>
>>>>
>>>>
>>>> *So above noted 6 points are what I intended to achieve! So Please
>>>> guys help me on this **:)**. Hope I have given Info!
>>>> *
>>>>
>>>> _______________________________________________
>>>> List mailing list
>>>> List at lists.pfsense.org
>>>> http://lists.pfsense.org/mailman/listinfo/list
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> List mailing list
>> List at lists.pfsense.org
>> http://lists.pfsense.org/mailman/listinfo/list
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pfsense.org/pipermail/list/attachments/20120503/8ff9b3f1/attachment-0001.html>


More information about the List mailing list