[pfSense] Vlan Trunk

Abdullah Nihan abd.nhn at gmail.com
Thu May 3 13:33:47 EDT 2012


Guys Please help me on this!
I have posted my issue on Forum can you please take look and comment.

I really thank you for your valuable time spend on helping Thank you! :)

FORUM POST LINK:
http://forum.pfsense.org/index.php/topic,49043.msg259653.html#msg259653

On 3 May 2012 12:23, Abdullah Nihan <abd.nhn at gmail.com> wrote:

> I have posted this on forum please write you suggestion on there...!  Link
> bellow:
> http://forum.pfsense.org/index.php/topic,49043.msg259653.html#msg259653
>
>
>
> On 3 May 2012 08:44, Abdullah Nihan <abd.nhn at gmail.com> wrote:
>
>> Espen thanks for your reply, that's correct I want I want to use Vlan10
>> to be WAN as well as LAN.
>>
>> Since I wrote about the scenario can you give me suggestions on how to do
>> this?
>>
>>
>> On 2 May 2012 23:37, Espen Johansen <pfsense at gmail.com> wrote:
>>
>>> With one exception, it seems you want to use the same vlan as both lan
>>> and wan (Vlan 10)???
>>>
>>>
>>> On Wed, May 2, 2012 at 8:34 PM, Espen Johansen <pfsense at gmail.com>wrote:
>>>
>>>> What exactly is your question here?
>>>> I don't see any issue implementing this.
>>>>
>>>> -lsf
>>>>
>>>> On Wed, May 2, 2012 at 7:08 PM, steel max <steelmax11136 at gmail.com>wrote:
>>>>
>>>>>  Dear All,
>>>>>
>>>>>  I am trying to implement a wireless network on my corporate
>>>>> environment using, Authentication by Domain Controller windows AD & Radius
>>>>> on same Server as well with Pfsense Captive Portal!
>>>>> ***Thanks to you guys for the help, I have done that in my testing
>>>>> zone!
>>>>>
>>>>>  *ABOUT My Corporate Network:
>>>>> *Our Corporate network is pretty much complicate to me. Its back-end
>>>>> is powered by a Linux DHCP, Squid Proxy, Cisco Firewall & Layer 3 Switch
>>>>> (Core Switch) which has 19 Vlans and all Vlans are trucked and distributed
>>>>> over the network using manageable Dlink switches. Vlans are 5 to 95 and the
>>>>> Vlan I'm intended to use is Vlan10 which is configured in the Layer 3
>>>>> Switch as a 'Guest Vlan'.
>>>>> Vlan5 is for Data Center, which gives IP range: 192.168.1.xxx & Vlan10
>>>>> (GuestVlan) IP is 192.168.2.xxx! And goes so on according to VlanID!
>>>>> Our Network is more like a Campus Area Network. We have 5 separate
>>>>> building in the city connected by Fiber Optic Cable Provided by 3rd Party.
>>>>> So Vlan10 will be distributed across the network as like other Vlans
>>>>> through trunk ports!
>>>>>
>>>>>
>>>>> *About implementation:*
>>>>>
>>>>>  *I want the Output from pfsense should give:*
>>>>>
>>>>> * *
>>>>> 1.    Pfsense should’ve WAN of Vlan5 as all the servers in Datacenter
>>>>> are in that range of IP
>>>>> 2.    WAN from Core Switch Vlan10 (WAN from vlan5 & 10 may be dual
>>>>> WAN or something?)
>>>>> 3.    LAN only Vlan10
>>>>> 4.    LAN output Vlan tagging and trucking enabled to distribute
>>>>> across the network
>>>>> 5.    Pfsense should be able to talk Windows AD & Radius Server
>>>>> 6.    Any user connected to Vlan10 should pass through captive portal
>>>>> & radius Server
>>>>>
>>>>>
>>>>>
>>>>> *So above noted 6 points are what I intended to achieve! So Please
>>>>> guys help me on this **:)**. Hope I have given Info!
>>>>> *
>>>>>
>>>>> _______________________________________________
>>>>> List mailing list
>>>>> List at lists.pfsense.org
>>>>> http://lists.pfsense.org/mailman/listinfo/list
>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> List mailing list
>>> List at lists.pfsense.org
>>> http://lists.pfsense.org/mailman/listinfo/list
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pfsense.org/pipermail/list/attachments/20120503/9ea84e9c/attachment.html>


More information about the List mailing list